Leakdown test came out good, compression test is low at 80psi so I will do a new top end soon before riding, right now just trying to start it. The carb is cleaned and has new reeds. and it has a good strong blue spark.
The only way the bike will even attempt to start is by giving it a squirt of gas in the carb, holding the throttle wide open and kicking it, it spins over a revolution or 2 then backfires out of the exhaust. Sounds very weak and weird when it is spinning over. I pulled the flywheel off thinking it could be a spun flywheel but the keyway was there and in good condition.
What could this be? Also how do I press the flywheel back on?
The only way the bike will even attempt to start is by giving it a squirt of gas in the carb, holding the throttle wide open and kicking it, it spins over a revolution or 2 then backfires out of the exhaust. Sounds very weak and weird when it is spinning over. I pulled the flywheel off thinking it could be a spun flywheel but the keyway was there and in good condition.
What could this be? Also how do I press the flywheel back on?