I changed my main jet and now my throttle is very loose. Can anyone tell me how to fix this problem ?
You got something hung up or different when you put the cap back on. Do you have a tors eliminator kit on it or the brick on top?
Ok will I have to remove it again ?Check the cable to make sure it's not hung up on top. You should have a bit of play though.
No just inspect it. If nothing then remove the cap. It could be the spring.Ok will I have to remove it again ?
Try adjusting it at throttle.I went and inspected it didnt see anything hung up on top. What else could I do ?
Try adjusting it at throttle.
Something is getting caught or something preventing the spring to have tension on the slide. That's why when it's off the spring has full tension and it feels fine.
Your slide could be in the wrong way. There's a groove on the slide, and a little brass nub inside the carb. The nub should sit inside the groove.What could it be ?
Your slide could be in the wrong way. There's a groove on the slide, and a little brass nub inside the carb. The nub should sit inside the groove.