Right so fitted rear suspension today, very easy do it yourself job! Tools i used were:
10,12,14mm socket
10,14mm spanner
Screwdriver
Flathead
Pliers
Cutters
Very easy as a one man job had the quad up on my stand so weight was off the rear making it so much easier to work on.
Removed rear seat plastics and air box to carb. Once this is off you can see everything you need to with ease.
Undone bottom safety wire and punched through pin, undone top 14mm nut and punched bolt through. Shock out.
Then replaced with new shock done up top bolt loose with washer, then put bottom pin back in with washer and safety wired as needed. Then put wuad back on floor and done up top bolt to required torque.put plastics back on then fixed the compression bottle to the 2 stroke tank cage with 4mm rubber sheeting wrapped around cage metal then clamped bottle to this using two heavy jubille clips.
Looks great and works great but dont really understand how to set it up correctly?? Want it to be as useful and confidence boosting to my riding as it can be! Helpppp