C Collin lammers New Member Jul 27, 2015 5 0 12 23 Jul 31, 2015 #1 I am rebuilding my engine and I noticed that the inner clutch basket is hard to spin. I just want to know if that is normal and or it will be ok when I go to start and ride it? Hope someone can help.
I am rebuilding my engine and I noticed that the inner clutch basket is hard to spin. I just want to know if that is normal and or it will be ok when I go to start and ride it? Hope someone can help.
Herpderplol BRRAAAAAAAAAPP Aug 22, 2012 6,290 496 136 26 Dickinson, ND Jul 31, 2015 #2 Spinning the inner should be spinning gears, either tranny or engine, i forget which. Which would be understandable to not be that easy Check for grooves on the outer basket
Spinning the inner should be spinning gears, either tranny or engine, i forget which. Which would be understandable to not be that easy Check for grooves on the outer basket
C Collin lammers New Member Jul 27, 2015 5 0 12 23 Jul 31, 2015 #3 If I just spin the inner without clutch plates and in neutral. Sorry that's what I meant. Should the inner still be hard to spin
If I just spin the inner without clutch plates and in neutral. Sorry that's what I meant. Should the inner still be hard to spin
speedyslyder 2 STROKES RULE Technician Feb 14, 2014 4,274 828 178 43 massachusetts Jul 31, 2015 #4 did you watch this?
C Collin lammers New Member Jul 27, 2015 5 0 12 23 Jul 31, 2015 #5 Yes. I followed exactly l, double checking everything and it is still hard to spin.
C Collin lammers New Member Jul 27, 2015 5 0 12 23 Jul 31, 2015 #6 Never mind thanks for the Ideas. The bearings were to tight so I lightly tapped with a mallet and now is easy and smooth to spin
Never mind thanks for the Ideas. The bearings were to tight so I lightly tapped with a mallet and now is easy and smooth to spin