The clutch lever has plenty of spring and snaps back like it should but the clutch, itself, doesn't really engage or disengage. It feels like... even though the lever is moving, the clutch isn't. It drags enough to stall the quad when I pop it in gear when I've got the lever squeezed but it doesn't grab fully when I release the lever. It has enough grab that it will pull the quad forward when I release the lever but it still slips like crazy. I can upshift through the gears and the quad will definitely accelerate, but if I lay on the throttle it'll slip. It has enough grab that I can kick it out sideways on gravel, if that's any indication... but, like I said, it doesn't fully disengage either. Will the lever fully squeezed, it'll stall the quad when I pop it into first if I don't give it some gas.
I'm going to change out the case oil to see what's going on in there, but these are symptoms I've just not seen before on a wet clutch. Thoughts?
I'm going to change out the case oil to see what's going on in there, but these are symptoms I've just not seen before on a wet clutch. Thoughts?