bogging out in high rpms??

[blaster_01]

ok so i was out on my quad earlier today and after i was parked for a lil while i headed home and in 1st and 2nd in high rpms just before i shifted my quad was bogging down, almost like it wanted to die until i switched gears then it was fine.... any ideas of what that is???

 

[Awk08]

did it only do it once ?

could be an airleak, plug starting to foul, dirty carb or dirty air filter.

try a new plug, clean your carb and filter, then leak down test of the problem continues

 

[blaster_01]

it happened once on the way home then it happened when i drove it after washing it..... whats the gap suppose to be on a blaster bored out to 250

 

[Larry's Shee]

Sorry we don't have plug specs for a 250 Blaster, because they don't exist X(
However if you have a Blaster bored .050" over a br8 plug would be gapped .028" I:I

Stock blaster is 195cc + .050 bore might get you to 200cc. I'm not doing the math or looking for the chart.

 

[Racer51]

my first guess would be a dirty pilot jet or something else such as an air leak