So I rebuilt the blaster. But let me start with what happened. So a year or so back a buddy took my blaster to a private track and brought it home broken. He paid for the new case that the chain broke(left side) so I had to cut the chain cause it was all messed up into one chain basically. Doing that I made a mess on the carb now thinking I should have just took it off way before I cut it but my dumb ass decided leave it on nothing can get in well maybe some shards got in idk but it was sealed since it was all still attached. So I took it all apart and removed the motor. Fixed the case and took it for a spin see if motor worked. It worked but I didn’t give it all it had. So when it was time to rip it kinda ripped at first didn’t bog yet. When a buddy came to rip it once he got into 3rd it start to bog in 3 wot, so I jumped on same thing but I down shift and I’d get some power then a bog and power and bog and power. So I was like hmm my gf jumped on she wanted to do donuts she got off a few then in 2nd bog come back bog come back die. Kick over and did it again. So I took off from reeds back and saw that the reeds had a gap, enough to make out a face on one side and the other a nice lift, not even sealed like I seen on pictures and have read. Also carb prob needs to be cleaned since it’s been sitting for a year or more, the boots have no rips in them. The reeds are stock and I have a 01 blaster. If I forgot something let me know. Trying to have this ready ASAP. Any help is appreciated. Ride hard & Ride Fast. Be safe out there