Blaster need help

[Bkg]

Im having problems getting my blaster to idle and run right after I installed a new cdi and coil ran fine before I got the parts off of eBay

 

[blasterboy91]

Im having problems getting my blaster to run right

What's it doing? Just a vague statement.

I installed a new CDI and coil

If it ran fine before like you said, why the change in parts?

i got the parts off eBay

There's the issue. What brand of products did you buy?

 

[Bkg]

New Cdi due to when I would ride it for a few mins it would shut off and not run again until it was cold the next day then I ran it till it died then tapped the cdi with a screw driver and it started up again I can't get it to stay running I've played with the carb adjustments and everything also the coil I got had the wrong kind of plug on it so I swapped it with the old one I can get it to idle with the throttle adjustment on the bars but if I give it throttle it revs up and doesn't want to come back down it is also sounds like it's cutting in and out when it dose that

 

[Tooloose]

Add throttle free play at top at the thumbscrew and see if that fixes the problem. about 1/8 to a 1/4 inch with throttle closed.