I have a problem with my Blaster the last couple of days of cutting out when I put it in gear? The only way I can take off and keep it from cutting out is to give it a lot of gas to take off then it runs/changes fine. Can someone tell me what may be wrong?
Blaster cuts out when put in gear
- Thread starter GateCityGeneral
- Start date
the clutch probably isnt fully disengaging.
take off the cover and pull the lever. do the plates separate? check the basket for grooves and see if it needs to be filed/replaced.
this is what mine looked like, so it was replaced
take off the cover and pull the lever. do the plates separate? check the basket for grooves and see if it needs to be filed/replaced.
this is what mine looked like, so it was replaced
The basket had already been filed n there is fresh fluid in it. I'm thinking it something to do with them plates or cable though so I will check them. Thanks for the help. Will report back
Grab a new set of clutches from eBay, cheap and work great!
Tusk Clutch Kit
Tusk Clutch Kit
Last edited by a moderator:
Like they said above change oil and adjust clutch cable. If that doesn't work then probably the basket or plates are wearing. Happened on my last dirt bike. Changed the plates and worked like new.
