Asr arms/ banshee spindles

[Fast6hand]

So I'm going to get some asr arms and run sealed ball joints. I'm curious what year banshee spindles I need? And will my 03+ hubs and calipers fit on the spindles? Thanks guys.

 

[MURPH]

keep your 03 + spindles and ask them to send you banshee ball joints for the lower arms and the blaster hiem joints for the upper a arms. I found this to be perfect because the hiem joints are alittle harder to steer and sort of act like a steering stabilizer so if you hit a stump cruising kinda fast you wont go off in the trees. hiem joints suck for the lower a arms cuz they get pack with dirt/mud/water and lock up no matter how much wd 40 you spray on them

 

[BlasterFun484]

and when you get your new heim make a boot for it to seal it

 

[Fast6hand]

Well I found a used set of banshee spindles. Everything else should bolt up. I run in a lot of wet conditions and really want the sealed joints. Thanks for the ideas though.

 

[MURPH]

I believe they have to be 1990 or newer because the earlier models had j arms

 

[Fast6hand]

I believe they have to be 1990 or newer because the earlier models had j arms

Yes that's correct. I picked up a left and right for 40.