A-arm

[Pj Uptmor]

I building my son a blaster from the ground up. A father and son project. Just got the frame. I haven't got the a- arms yet . They r on the way. My question is How good are the bushing in the a-arm? Do I remove them when I pc the a-arm r replace them or can I reuse them.

 

[Blaaster]

If they are stock arms the heat from the oven will possibly destroy the ball joints.

 

[Pj Uptmor]

You can't remove the ball joint from a-arm? I am asking.

 

[MURPH]

No stock a arms do not have removable ball joints

 

[Pj Uptmor]

I guess plan b . .
Thank you for the help ..

 

[Pj Uptmor]

The banshee a-arm don't fit . Am I correct.

 

[MURPH]

No they dont fit. If ur looking for a cheap set of a arms for a blaster I would get the alba plus 3 inch a arms. they have removable ball joints so u can paint them if u want and u can pick up banshee spindles pretty cheap on ebay that will fit with aftermarket a arms so u can run hydraulic front brakes

http://m.ebay.com/itm/181455832161?nav=SEARCH

 

[Herpderplol]

If you want quality i wouldnt go for alba arms, but money usually decides what people buy

ASR would be your best choice for quality, customer service and most everyone here knows how to adjust them