4/110 hubs on a blaster

[DylOrr]

Is there any 4/110 rear hubs that I can put on my blaster that will fit with no modifications? Also a 4/144 hub for the front? I:IThanks

 

[brandoz28]

you may be able to get some spacers that will adapt it, but i don't think you'll be able to find hubs that'll give you those patterns

 

[oldskool83]

from what i know trx hubs will fit on a banshee, my 200x came with banshee hubs and wheels, its pretty safe to say yes they will fit on a blaster also.

 

[phragle]

cross drill rims.

 

[TORKER]

TRX 300EX/400EX/450R hubs will fit. DON'T get new ones. Used ones will be less of a thight fit. New ones may be impossible to fit, they just MAY. Maybe they'll fit fine. Those will make it about 1 in. wider per side. And, of course, are 4/110 bolt pattern.

TORKER.

 

[samolia]

why dont you just bolt on some banshee hubs i know there 115x4 i think...
and they come witha 9inch rim.

 

[timsyfz]

Lonestar makes some billet hubs for Yamaha axles with Honda patterns. They come up for sale used quite a bit for $50ish.

 

[19Blaster89]

TRX 300EX/400EX/450R hubs will fit. DON'T get new ones. Used ones will be less of a thight fit. New ones may be impossible to fit, they just MAY. Maybe they'll fit fine. Those will make it about 1 in. wider per side. And, of course, are 4/110 bolt pattern.

TORKER.

Does anyone know if the wheel spacers will go from blaster 4/100 to 4/110 need to know asap

 

[Awk08]

Does anyone know if the wheel spacers will go from blaster 4/100 to 4/110 need to know asap

it says above to buy older model 300/400ex rear hubs and they will fit onto our axles to give you 4x110 honda pattern.


I can't find any specific adapters for 4x100 to 4x110

these MAY work ?.............
http://www.kgpowersportstuff.com/products/sti-slasher-wheel-spacer-adapters-for-atvs-and-utvs
says converts 4/4" to 4x110mm
4/4 is 4 bolts x 4" apart.
our 4x100mm is 3.937" apart
you MAY be able to fudge the bolt holes to fit ?



here's some links to check, email and/or call to see if they have or can make you something,
I doubt it's going to be ASAP.

http://rimspacer.com/collections/4x100-4x3-94-wheel-adapters-wheel-spacers-4-lug-hub

http://www.sixity.com/atv-parts/wheel-spacers.html

http://shop.adapterkings.com/4-Lug-ATV-to-4-Lug-ATV-4-Lug-ATV-to-4-Lug-ATV.htm

http://www.motoxmall.com/c-atv-wheel-adapters.html

 

[Pj Uptmor]

Durablue makes hubs to fit a blaster and banshee axle with a honda bolts patterning. That what I put on my son blaster because of extra tires I have for trx 250r.