I will be jetting my wifes blasty as soon as I get the motor back from Ken Occonor. Just looking for a starting point. Mods are 240 sleeve, hot rods 4mm crank, port and polish, V force 3 reeds, trinity stage 4 pipe, 4 degree timing advance, lightened flywheel, 36mm PWK, CFM airbox, K&N filter with outerwear, and I will be running a B9es plug. I will be riding at 0-1000 feet. The carb has a 162 main, 42 piliot, and I'm not sure what needle. I have a jet kit from 150-160 and I also have various piliots. I know I have to do plug chops and dial in the piliot. I have never done this before and I would like to close when starting. Thanks in advance for your help!