i have been all over and its hard to find what ppl are using on a 28mm.... but the few i found was around where im at between 45-48 pilot and 155-165 mains.
28mm keihin help please
- Thread starter 08yfzman
- Start date
i have been all over and its hard to find what ppl are using on a 28mm.... but the few i found was around where im at between 45-48 pilot and 155-165 mains.
try this for uploading pics to your post, works much better than the sites upload un-function, LOL
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNE6IW2nlcTlda65eE9S8ZxtBJuNIA
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNE6IW2nlcTlda65eE9S8ZxtBJuNIA
thats similar jetting to what i run on my 34 pj and my mods.... 48 pilot, dgh needle, 155 main
my money is on a CPW suggested needle will set you free
relay all that info to the dude at cpw tomorrow morning.
if nothing else he'll suggest the correct needle for you, and possibly pilots and mains too.
have your credit card info ready and order while you have him on the phone.
IIRC...he made a paypal request for me
if nothing else he'll suggest the correct needle for you, and possibly pilots and mains too.
have your credit card info ready and order while you have him on the phone.
IIRC...he made a paypal request for me
Don't waste your time with ct. In my opinion a cel,or dgh needle, 48 or 50 pilot, 150,152,155, main is all you should need to jet that carb.As long as there is no air leaks and everything is in good working order.
i will keep those in mind when cpw gives me a suggestion... ima say dgh as the other guy on here said that as well
talked to cpw today, only choice he recomended was a j j j needle but they are backordered til the end of the week
still waiting on needle from cpw..... the only way it runs good is with the needle on the second clip from top ..... it zings out on the 3rd clip but i understood zingy meant lean not rich?