260 cc bb kit? where do i get one
- Thread starter 98blaster+4
- Start date
ROFL! I hate saying this all the time, people need to get sh*t straight between big bore kits and boring! Its not a 260cc blaster. The cylinder is just bored .60 over, not making it a 260cc blaster!
CP Customs did a 265 kit for me once, but it would not run for more than 5 minutes before it overheated.
hopefully you all know that i do know the difference between bb kits and boring up
thought you guys would enjoy a good laugh at this guy
thought you guys would enjoy a good laugh at this guy
Tuning was probably off on the carb or timing to far advanced
What was your A/F ratio at WOT
There was no tuning it in correctly to run motocross. If you wanted to put around then it was just ok.
is it just me or did it look like that dude made his own pipe? with a stock bottom part and his own on the top
MAN! I been doing my math ALL wrong!!!!, mines .255 over, DAMM!!! I'm rock'n a 450!!!!!! wait! how much does my +3mm crank add???????8-|
Displacement=BoreXboreXstroke and divided by 3.1416/4
Lets do the math
Stock bore=66mm
Stock stroke=57mm
3.1416/4=.7854
Move the decibel place by one to move mm to cm
this is a easy way
(6.6) (6.6) (5.7) (.7854) = 195cc
the stock blaster is 195cc
Lets do the math
Stock bore=66mm
Stock stroke=57mm
3.1416/4=.7854
Move the decibel place by one to move mm to cm
this is a easy way
(6.6) (6.6) (5.7) (.7854) = 195cc
the stock blaster is 195cc
