2004 blaster for sale...(ma/nh border) title in hand

cirame1

New Member
Jul 30, 2008
386
3
0
Been on forum for years and years. Haven't posted or even logged in in a couple years. Ive had my blaster for atleast 5 or 6 years and bought it from my friends dad who was original owner. Blaster has maybe 3 rides on it from me and maybe 5 or 6 from previous owner. I am older and moving and have not used it in years. It has many aftermarket parts including a fully built engine with full race port and polish and a milled head to run on 93. Quad starts on first kick and is very fast. Since the top end was built it has had just the proper break in and has not seen a trail or a ride. Motor wise it was built with a wiseco piston and ring .20 or .40 over if i remember correctly, has a set of reeds (dont remember brand) 30mm mikuni carb with all proper jetting, intake mani boot, full fmf exhaust, open air box with uni filter and all head and cylinder work. Yes it could use a bigger pipe on it and carb to really open it up but it is very fast. Other than that all other stuff done is self explanatory including extended swing arm. I have clean title in hand and also have helmet, gloves, goggles, winter rims and tires and many many stock parts.

Quad has 400ex rear shock and raptor 350 fronts or banshee fronts. It has been geared for more top speed with new front sprocket.

The oil injection has been removed and is premix with 2stroke yamalube only. The tors system has also been removed. Quad has only used ngk gold plugs since rebuild. Tail light is removed but headlight works both high and low beam.

I am moving and need it gone. I am located in Amesbury,MA on NH border and can be reached more easily at 978-420-9361. (Tony) I dont come on the site much so that is best. ASKING $1400 obo

No i will not part any parts off the quad.


2012-08-03_12-43-02_647.jpg


2012-08-03_12-43-20_983.jpg


2012-08-14_18-41-08_432.jpg


2012-08-14_18-42-35_229.jpg


2012-08-14_18-44-19_648.jpg


2012-08-14_18-42-58_97.jpg



Thanks for looking.
 
Last edited: