I got this quad and it had been sitting for awhile so i had to remove and clean out the carb, put a new spark plug in it and I got the quad running good again Took it out a few times with no problems. I let the quad sit for few months when my buddys wanted to take it for a spin. They couldn't kick start it so they tried to pull start it. They pulled for a long time, i'm not sure how long, i was working of something else at the time but the carb was gummed up again from not running the carb dry when I parked it. They cleaned out the carb and now it has no top end at all (what are friends for right). I pulled it back apart, cleaned well, i even used a tourch tip cleaner to make sure the jets where completely clear of sludge. I put the float to the lowest level possible and still feed gas, put another spark plug in it, did a compression test (115psi) along with removing and inspecting the reeds.I'm still having the same issue. O ya and the gas is new i just poured it in last night. The bike is completely stock, stock pipe, stock jets and stock air cleaner. I am all out of ideas. One of the friends that broke the bike thinks the top end is bad now from the engine having no lubrication when they were tring to start it. Any help is apprieciated Thanks. And sorry for the long explination but i was just tring to get as many things out of the way in one shot.