Search results

My daughter is 6 and can handle it well. No clutch work yet. Quad is running great. Thanks for askingI:I

Re: lt 80 carb problem fixed Got the rebuild kit Friday, and it was the needle jet, no more flooded motor. Can't believe how good this thing is running. Thanks for all the help.

Thanks for the info, I will look him up

I usually do all the work myself too. Will have to look into jack. Found CT racing will do the work for $90, doesn't seem to be a bad deal.

Looking to have the clutches done, does it make a big difference?

Yes , that was the first thing I replace was the petcock. Bought a Banshee petcock with on and off. Reeds are installed correctly, did a leak down test and that was fine. Took the carb apart and the needle is worn out, hopefully that is the corporate, bought a rebuild kit on ebay. Thanks for the...

Okay here is the problem I'm having. 96 lt 80 new petcock, boyseen reeds 90 main jet, oil block off kit fmf pipe, uni filter. Bike starts up fine after sitting for 1 to 2 days, runs great for 20 min, then it will die. When you try to start it again it acts like the battery is dead. Battery...

She has a lt 80 modified, I have a 03 blaster

Going this Saturday with my 6 year old Daughter to Badlands, was wondering if anybody else will be going with small kids, maybe hookup and do some riding. It will be her first time there.

I have clymber manual believe all bolts are loose that need to be, Just wont loosen back up. I know the correct measurement for the adjustment, just went in with the adjust to much and now can't loosen the chain.

I tighten my chain the other day and tightened it to much. can't get the chain to loosen up. I have the tensioners slacked off, but can't get it to pivot back to remove the tension. If any one has any idea how to remove the tension on the chain, that would help?

I'm in for the badlands. let me know?

soak it in Diesel

Its to eliminate the parking brake, the plate just covers the master cylinder on the rear caliper setup. It also cleans up the bar area, so you can get aftermarket clutch lever and bars . A real clean look.

Hope you block off the carb, or your just going to suck air and go boom.

Northwest Indiana. little to far

Where at in Michigan? Do you have a link?

Do you ride from your house or do you have to trailer it?

I have a fmf sst with a powercore and the thing pulls the front end up with ease. It's got low to mid range power. Don't know anything about the other pipe. If you are thinking of just getting pipe, i would reommend that you get the header also, it will work better, help your motor breath and...

Here is a viseo if u don't think it works. The stuff is like magic.