Search results

Have 1988 Yamaha DT 200 L/C engine that needs rebuild. I have all pieces except carb. is disassembled needs piston rings gaskets etc. will take $500.00 plus cost of shipping. If not sold this time going on ebay. Can email pics upon request. This would make an awesome engine for your blaster...

I have the radiator. I will not sell it for 200 I have 565.00 in it and I will not take much less than that. These are rare I want to sell it but I know what its worth and how rare they are. the bottom end is fine. I am not desparate to sell. I will keep it before I give it away. I know peple...

I bought this for a project blaster of mine but I just do not have time to finish it or the money. It needs a rebuild of the top end I do not know what size piston or bore it had but the local Yamaha shop said if needed it could be sleeved. I can email pics this weekend if anyone is...

Guys, my whole point about this posting was that the guy is indecissive about what he wants. I really like the freak, he is a good guy, I am just disappointed he would give up his Blaster to work on a car. It is his Blaster and he has every right to do that. It just is sad he cannot wait a few...

He was asking 800.00 on c/l the other day on the Raleigh craigslist. I put over 1000.00 into new plastic and a bunch of other new parts.

01blaster_freak has his blaster for sale to fix up his Mitsubishi Eclipse. Im disappointed. real disappointed, I practically gave it to him for helping me with my blaster frame swap. That guy is a real nice guy and a good guy but he can't make up his mind what he wants to do. I understand that...

You can get a new one from Yamaha still, but its around 600.00 dollars depending on how greedy your stealership is, I know thats why I bought a used one and replaced my bent one. The dealership can put the VIN # on it for you. Just keep the MSO for that new frame. I saw a couple years ago that...

my 2 cents 20 to post for sale and PM memebers. Maybee someway to verify the true identity of a member wanting to post for sale should be required for members with less than 50 post should be required or 20 Post and a member at least 6 months. I know verifying identity would be tough. Doesn't...

Depends on your budget but its not to hard check ebay cycle salvage yards for parts, you need the master cylinder, spindles, disc and brake lines to do this, you do not need the a-arms as they are the same. Me an 01blaster_freak basically just did this to mine. I had a bent 04 frame and replaced...

Depends on your budget, you can go with used ones off another blaster you of course will need the calipers, brake lines, mastercylinder, and the brake hubs and spindles, your a-arms are the same I believe so you would not need them. I would check e-bay or cycle salvage places for used or post on...

I have the parts for the 04 caliper , caliper, brake lines and mount for caliper, I just need stuff to hook up brake pedal and master cylinder. If you have that stuff let me know pricing, etc

Hey, Thanks for that link above from MacDizzy, I had never seen that before. Cool!!!!!. That answered a few questions about that engine but not about the rear brakes but anyhow. I guessif I can not figure out something with the stock stuff I may have to buy stuff aftermarket.

Thanks for the comment. I did not think about that but now the frames been repainted thats not practical. To be honest I should have done some research before starting this frame swap but,lol,I didn't, I assumed because people were swapping to the hydro setups that someone made a bolt on...

I can not believe nobody has encountered this before. Where can I find a bracket to use the stock mastercylinder and caliper? If this is not possible on the older frame who has these parts? I tried blaster zone no one would reply to my e-mail. Please anybody got any advice?

Guys, I just swapped out the frame on my 2004 Blaster for an older one from a pre 2000 model because the old one was bent. My Question is this. I have the stock 2004 rear brake master cylinder and caliper but not any of the rear brake parts from the other frame. How can I use or can I use any...

I am not quiting the site, its just presently to time consuming for me to post. I could e-mail this pics to myself good idea but I just like for people to see my stuff. We can hookup pretty much whenever you got the time, me an 01 freak are gonna go somewhere sometime and ride. BTW im not done...

Last attempt to load up pix This websight is a great site but it is just too difficult to post pictures on here I like this sight but I have had so much trouble posting up these pics. I have had no trouble posting on other sights but I am on the verge of taking a hammer to my...

more pics I hope 595.jpg[/IMG]6.photobucket.com/albums/hh170/rr97guy/100_0587.jpg[/IMG]

More pics[/IMG]/albums/hh170/rr97guy/100_0589.jpg[/IMG]

Progress pics Here are some pics of the frame swap out to replace the bent one. Thanks 01blaster_freak for the help. He is a very good guy and extremely knowledgeable he did most of the work and we had had everything swapped in about 3 hours. Thanks 01blaster_freak.70/rr97guy/100_0575.jpg[/IMG]