Recent content by Codyney97

I replaced it all with OEM . How do I Check the kill switch. I tried to bypass the key ignition but that didn't help any.

I got a 2001 yamaha blaster, it was having trouble hitting powerband. It ran fine other than that. I was told to clean the carb to fix it. However, after I cleaned the carb and got it back together it no has 0 spark. The t.o.r.s is already eliminated and has a new coil, cdi, regulator and...

No its not getting spark. It has good compression, and all the wire are connected correctly

I got a 93 Yamaha blaster. I was riding it and just stopped. So it was rebuilt, got new cdi, and coil. The tors is eliminated. I've looked at it and can't figure it out. Any ideas?

I'm rebuilding the top end of my 99 blaster with new cylinder and all. What would be the best mods to do for performance while I got it apart

Yep

Its good. Nothing wrong with it

The slide is 100% I checked it. Its in proper and the needle is not jammed up or anything

Do you guys have a link or something for a factory carb I can't find one and if I do it looks completely different

I'll double check it. Thanks

YeH its good, it must be the cable itself

The cable is bad. There is no resistance in the throttle and it is screwed snug in the carb and handle so its pretty stretched

Alright. I disabled that and it started first kick. But it was at like 100% throttle and I had to quickly turn it off. Is that because of the bad throttle cable?

Thanks

How do I disable that