No spark

Codyney97

Member
Aug 14, 2015
16
0
32
26
I got a 2001 yamaha blaster, it was having trouble hitting powerband. It ran fine other than that. I was told to clean the carb to fix it. However, after I cleaned the carb and got it back together it no has 0 spark. The t.o.r.s is already eliminated and has a new coil, cdi, regulator and stator. Any ideas of what the problem would be?
 
Check you kill switch is work properly. Maybe bad earth wire. There is a earth that is onto the coil that you can check.

Have you check that the stator in is the range with meter. How to do this in service manual.

Also did you replace with OEM parts or cheap ebay parts.
 
  • Like
Reactions: Codyney97
ouch that is alot of electrical parts replaced all at once.
just busting balls but i looked at your other threads stemmed back from 2015 lol
1 member said it was like pulling teeth?:D
 
  • Like
Reactions: Codyney97
I replaced it all with OEM . How do I Check the kill switch. I tried to bypass the key ignition but that didn't help any.