Here is the step cut.
Here's another good picture (no flash) the shows the two components and the step cut.
Here's a good picture (no flash) that shows the gasket setting in the cut.
The cut step fits flush with the copper head gasket.
Here is the step cut.
10 Hours on the clock! And 10 hours on the "cheap cast piston" that everybody loves to hate.
10 hours of use,and just removed from the cylinder. Nothing wiped off. First 5 hours... REDLINE OIL and oil injection. Second five hours Maxima Castor 927 mixed 20 to 1 ratio! NICE AND CLEAN!
Exhaust port is nice and clean.
joeak47

Here is the step cut.

  • Like
Reactions: Tommyz125
There are no comments to display.

Media information

Album
Closing up the squish band clearance on my modified head! My testing continues....
Added by
joeak47
Date added
View count
1,315
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
7519-1345054533-5fe9c08ffbcc9eba87cdebc673239e4b.jpg
File size
25.7 KB
Dimensions
600px x 470px

Share this media

Top Bottom
Back