I was doing a wheelie on my blaster and I fell off and my quad went back on all 4 wheels. It shut off I went to start it and the kickstart wouldn't move and the wheels wouldn't turn when it's in gear. I have the og oil injector in. Any ideas on what I should do.
Yamaha blaster froze up... seized I believe
- Thread starter jtstinson
- Start date
sounds like its locked up..... i bet you got a air bubble in it and you never bleed the lines so it locked up.
top end/bottom end
flywheel/stator
need to find evidence
either take exhaust off and look up at cylinder,or through reed valve
or just take it apart but.
look at the flywheel/stator to it is behind the plastic cover by your footshifter/chain ect.
it is possible something on the flywheel stator side broke and not your top end..need to investigate though
flywheel/stator
need to find evidence
either take exhaust off and look up at cylinder,or through reed valve
or just take it apart but.
look at the flywheel/stator to it is behind the plastic cover by your footshifter/chain ect.
it is possible something on the flywheel stator side broke and not your top end..need to investigate though
10 minutes to pull the top end off, why haven't you done it already?
Actually I just read Speedyslyder's advice. Listen to him...
A wheelie would not mess up the oil injection.
Only an owner can mess up the oil injection...
Steve
Actually I just read Speedyslyder's advice. Listen to him...
A wheelie would not mess up the oil injection.
Only an owner can mess up the oil injection...
Steve
Similar threads
