Widening help

Peppy0129

New Member
Oct 11, 2015
1
0
1
27
I'm looking to make my 2003 blaster wider than stock and I'm not looking to spend a lot of money on it I want the front to stick out atleast +4 and the rear end to be the same I can't seem to find parts to do this and the ones I do find are expensive as hell....need parts asap lol
 
You can flip the front wheels to gain some extra width.

Stud spacers are a cheap way to get wider.

A Banshee rear axle is a direct swap for the rear and will make it 3 3/4" wider.
 
Yea the banshee rear axle is a direct swap. What year is your blaster? Going over to the banshee axle can change your rear brake setup if not a 03-06 blaster. The banshee axle requires a brake hub that's fixed. They only came on the 03+ blasters. If you have a 88-02 blaster the rear mechanical brake will not work.
 
It is a simple swap for your 03 Blaster, the Banshee axle will just push in without any fuss of removing any other components.
 
You can flip the front wheels to gain some extra width.

Stud spacers are a cheap way to get wider.

A Banshee rear axle is a direct swap for the rear and will make it 3 3/4" wider.


Flipping the front rims is not an option on an 03, without relocating the valve stems to the other side of the rim.