What Jets Are You Using

) What type of aftermarket exhaust do you have? FMF Fatty with shortened power core II silencer

2) What type of airfilter do you have? K&N with a CFM Alum Air Box

3) We Run aCFM Aluminum AIr Box

4) What is your elevation? close to Sea Level in Florida

5) What size pilot jets are you using? 45

6) What size main jets are you using?150

7) What is your Bore Size? Airsal 200 kit

8) Do you have a port job? YES

9) What kind of carb? Keihin PWK

10) What size is your carb? 33mm

What kind of reeds ? V-Force

oil injection or pre-mix ?pre mix with amsoil Dominator 32:1
 
i have a blaster and it has a
240 vitos big bore kit
standard exhast and standard air filter with no baffels in exhast
no airbox lid
standard card
v force 3 reeds
and i pre mix it but i dont no wat size jet/pilot jet goes in to it :/
can any1 help or tell me wat jets goes into it PLEASE??????????????????????
 
1) What type of aftermarket exhaust do you have? FMF Fatty gold series

2) What type of airfilter do you have? Uni Foam filter

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all A-stock air box with no lid

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 712 Feet

5) What size pilot jets are you using? 63 or 83 i dont remember?

6) What size main jets are you using? 360

7) What is your Bore Size? 67.50

8) Do you have a port job? yes

9) What kind of carb? keihin pwk flatslide

10) What size is your carb? 35mm
 
1) What type of aftermarket exhaust do you have?

fmf gold series fatty with powercore 2 silencer

2) What type of airfilter do you have?

UNI

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

Running Outerwear airbox lid cover

4) What is your elevation?

about 725 ft

5) What size pilot jets are you using?

stock

6) What size main jets are you using?

280

7) What is your Bore Size?

stock

8) Do you have a port job?

stock

9) What kind of carb?

stock

10) What size is your carb?

stock
 
whoooo finally a thread that i can show off my blasty!!!!!!!

1) What type of aftermarket exhaust do you have? FMF Gnarly w/ powercore 2

2) What type of airfilter do you have? UNI foam

3) Airbox: Stock no lid

4) What is your elevation? 544ft

5) What size pilot jets are you using? stock

6) What size main jets are you using? 320

7) What is your Bore Size? .30 over

8) Do you have a port job? sadly no :(

9) What kind of carb? stock premix

10) What size is your carb? stock
 
1) What type of aftermarket exhaust do you have? >>> DMC Alien

2) What type of airfilter do you have? >>> UNI Two stage

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all >>> Air box lid with no vents and bottom of air box trimmed off.

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) >>> 4,500 feet.

5) What size pilot jets are you using? >>>>Stock mikuni 26mm blaster carb with stock pilot

6) What size main jets are you using? >>>#340

7) What is your Bore Size? >>> 66.25mm

8) Do you have a port job? >>> YES! Aggresive Trail Port!

9) What kind of carb? >>> stock mikuni VM26

10) What size is your carb? 26mm
 
1) What type of aftermarket exhaust do you have?

F7 Fatty pipe, FMF power core 2 silencer.

2) What type of airfilter do you have?

2in PVC connected to K&N

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

No Air box at all, PVC pipe

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada )

Around 949.0 ft I think, ohio

5) What size pilot jets are you using?

60

6) What size main jets are you using?

142

7) What is your Bore Size?

.80 Bored over

8) Do you have a port job?

Yes, Port and polished myself.

9) What kind of carb?

Keihin PWK

10) What size is your carb?

33mm
 
Last edited:
1) What type of aftermarket exhaust do you have? >>> FMF Fatty

2) What type of airfilter do you have? >>> UNI Two stage

3) Are you .... stock airbox with NO lid

4) What is your elevation? (Central Portugal ) >>> 800 m (1600 feet ? ).

5) What size pilot jets are you using? >>>>Stock mikuni 26mm blaster carb with stock pilot

6) What size main jets are you using? >>>#310 -may go up

7) What is your Bore Size? >>> Stock

8) Do you have a port job? >>> YES! Aggresive Trail Port! (KOR)

9) What kind of carb? >>> stock mikuni VM26

10) What size is your carb? 26mm
 
A good thread but like my self who has just picked up a sec hand blaster and the lad who had it did no know much about him self on what mods have been done to carb etc does not help me how are you ment to know what jetting your useing the way i see it is that if it works fine why take it apart.
 
1) FMF fatty pipe, with power core 2 silencer

2) K&N air filter

3) no airbox lid

4) central NJ, no idea on elevation

5) stock pilot jets

6) 370 main jet

7) stock 66mm bore

8) no porting(but vitos forged superstock piston)

9) stock carb

10) What size is your carb?
 
1) What type of aftermarket exhaust do you have? LRD performance

2) What type of airfilter do you have? K&N with pre filter

3) Intake? custom aluminum box with 2.25 intake pipe, no lid

4) What is your elevation? 1800'

5) What size pilot jets are you using? 42

6) What size main jets are you using? 155

7) What is your Bore Size? +.30 over

8) Do you have a port job? Yes and Polish

9) What kind of carb? Trenga Racing OKO flat side "D", Kevlar reeds, and 1/2 inch reed spacer

10) What size is your carb? 30mm

Also moose racing 520 sprockets, Kevlar Clutch, Kenda Klaw tires, and hydraulic Breaks to stop it.
Mixing 40:1 with Klotz R-50
 
Last edited:
1) What type of aftermarket exhaust do you have? CT

2) What type of airfilter do you have? uni

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? E: project blaster, pre filter lid.

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 500 ft

5) What size pilot jets are you using? 65 (its been a while.. my closest guess)

6) What size main jets are you using? 195 (positive on this one)

7) What is your Bore Size? 240 (CT)

8) Do you have a port job? Yes

9) What kind of carb? kehnin

10) What size is your carb? 36 mm
 
1) What type of aftermarket exhaust do you have? FMF Gold series w/ Powercore2

2) What type of airfilter do you have? Uni Dual

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all. Stock with lid

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 500-1000 ft

5) What size pilot jets are you using? 42

6) What size main jets are you using? 250

7) What is your Bore Size? 66.5 or 20 over either way

8) Do you have a port job? thats on the to do list

9) What kind of carb? K

10) What size is your carb? 28mm
 
1) What type of aftermarket exhaust do you have?
fmf gold series powercore 2

2) What type of airfilter do you have?
parts ace (kandn style filter)

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all
stock airbox with no lid and outerwears cover on airfilter

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 450-1200 (mid ky and eastern and south eastern ky)

5) What size pilot jets are you using?
32.5

6) What size main jets are you using?
260 now but going to 270 or 280

7) What is your Bore Size?
stock (just got an new cylinder and namura piston)

8) Do you have a port job?
no

9) What kind of carb?
stock mikuni

10) What size is your carb?
stock
 
Last edited by a moderator:
1) What type of aftermarket exhaust do you have? (Full FMF Gold Series Fatty)

2) What type of airfilter do you have? (Twin-Air filter)

3) running a stock airbox with NO lid.

4) What is your elevation? (1266ft above sea level)

5) What size pilot jets are you using? (32.5 stock pilot jet)

6) What size main jets are you using? (280 after plug chop) its a little rich.

7) What is your Bore Size? Stock (66mm x 57mm) bore & stroke

8) Do you have a port job? Not yet!

9) What kind of carb? (Stock Mikuni)

10) What size is your carb? (26mm)


Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/#ixzz3FrL8xMIm
 
Copy And paste this part then fill it out
1) What type of aftermarket exhaust do you have?
trinity pipe with powercore 2 silencer

2) What type of airfilter do you have?
uni dual stage

3) stock air box, no lid

4) What is your elevation? around 800

5) What size pilot jets are you using? 50 (need 52 or 55)

6) What size main jets are you using? 162

7) What is your Bore Size? 67.50mm x 57mm

8) Do you have a port job? aggressive home port job

9) What kind of carb? pj34

10) What size is your carb? 34mm
 
1) What type of aftermarket exhaust do you have? FMF fatty with turbine core II

2) What type of airfilter do you have? K and N

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all Open Air box Outerwear cover

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 850 feet above sea level

5) What size pilot jets are you using? Stock size

6) What size main jets are you using? 350 on trails 360 on dunes

7) What is your Bore Size? 1 size over

8) Do you have a port job? Yes

9) What kind of carb? Stock Mikuni

10) What size is your carb? Bored to a 27mm

11) Reeds? V force 4

12) Oil injection? Yes

Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/#ixzz3XCjbhNDX
 
Last edited:
You must log in or register to reply here.

Similar threads

K
Jetting and horsepower
Replies
0
Views
94
Engine
KKane
K
J
Changed jets now blaster isn’t starting
Replies
0
Views
876
Jetting
JohnL
J
RIDE-RED350r
1995(?) Blaster, two-phase rebuild with my daughter
Replies
11
Views
613
Full Rebuilds
RIDE-RED350r
RIDE-RED350r
Saimon69
MY YZ250 SWAP BLASTER BANSHEE INSPIRED
Replies
0
Views
57
Engine Mods and Swaps
Saimon69
Saimon69
B
Jetting
Replies
0
Views
779
Engine
Brent1284
B
Top Bottom
Back