Just put a vitos 28mm carb on my blaster. I have full fmf with stock reeds. It’s about 10 degrees Fahrenheit by me average and was wondering what would be the best jet size for me. Also was wondering what size jet comes up n the 28mm from vitos cause I couldn’t find the size anywhere. Quad starts and idles great and pulls wheelies in 3rd but just want to make sure I’m not leaning out the bike with the stock jet size
Vitos 28mm carb jet suggestion
- Thread starter connorbornhorst
- Start date
guaranteed no vito's or any other carb comes jetted for 10 degrees
look in this thread and find what others running a 28mm mikuni are running, then go up 2-3 sizes to compensate for sub arctic temps...........
https://www.blasterforum.com/threads/what-jets-are-you-using.28981/
plug chop to confirm
look in this thread and find what others running a 28mm mikuni are running, then go up 2-3 sizes to compensate for sub arctic temps...........
https://www.blasterforum.com/threads/what-jets-are-you-using.28981/
plug chop to confirm