i am posting up my ported big bore kit, ported for a 4mill stroker it has trail port will need a bore/hone and head studs. i am also sellin the case with the stroker crank. the crank needs to be pulled out and ballenced. i am lookin to get 400 lus ship for every thing, the cylinder, the head, the case with the crank, it will come with a trans and some other misc parts. i thiunk one of the bearings went in the trans cause where you put the sprocket is a little tough to spin. but it shifted threw all the gears fine.
willin to trade for aftermarket parts. maybe a good swing arm or a longer steering stem?.
here is the link for the dyno chart.
http://www.blasterforum.com/engine-13/vito-bb-61mm-crank-20155/
if your interested you can text me if you like 267-475-7756 thanks
willin to trade for aftermarket parts. maybe a good swing arm or a longer steering stem?.
here is the link for the dyno chart.
http://www.blasterforum.com/engine-13/vito-bb-61mm-crank-20155/
if your interested you can text me if you like 267-475-7756 thanks
Last edited: