No Spark

[dopeBLASTER03]

Hello
I do not have a spark in my quad
I had the cdi progcdi module but it burned
I bought a new replacement for the 88-02r blaster with 5 cables
I connected all cables except black and still nothing
I used this diagram


I checked the resistance of the power coil and the resistance of the pulse generator and everything was normal
The coil has 226 Ohms
Impulsator has 22 Ohms

It is interesting when I connect the ground to the cdi module, there is no voltage on the cable from the coil
Thank you for any help

 

[Awk08]

the only time there is an extra wire from stator is when an 03-06 5wire stator is used and connected to e 88-02 4wire harness, and in that case the extra green wire must be grounded to the frame.
there should be no colors left unconnected.
connect them all color to color and if you have the extra green, ground it to the frame.

 

[dopeBLASTER03]

Yes, this is the green white cable that comes out of the stator and is connected to the ground
previously I had this cdi
http://progcdi.com/

 

[dopeBLASTER03]

New progcdi and it works!!!