Motion pro rear cable??

Discussion in 'General Support' started by Joseph Healy, Jan 10, 2019.

  1. Joseph Healy

    Joseph Healy Member

    Joined:
    Dec 22, 2018
    Messages:
    20
    Likes Received:
    7
    Trophy Points:
    44
    Gender:
    Male
    What is the advatange of loosing the front cable And what does it acually do I know the motion pro eliminates the front cable but I'm curios what It does and why I should eliminate it .
     
  2. Awk08

    Awk08 Moderator Staff Member Technician Forum Supporter

    Joined:
    Jan 30, 2009
    Messages:
    23,937
    Likes Received:
    2,057
    Trophy Points:
    175
    Occupation:
    Electrician/Contractor
    Location:
    Pa.
    The stock long cable runs from the rear caliper thru the foot pedal to the front brake lever to allow the parking brake to actuate the front and rear brakes at the same time, this is achieved by pushing the button down on the lever which hooks up the rear cable, pull the lever, then pushing the locking tab down to hold the lever in the braking position, locking both fr/rr brakes on.

    the shorty cable eliminates the long cable and gives a better solid connection to the foot pedal producing better rear braking. you will lose the e-brake to the rear, but fronts will still lock on.
     
    Larry's Shee likes this.
  3. Joseph Healy

    Joseph Healy Member

    Joined:
    Dec 22, 2018
    Messages:
    20
    Likes Received:
    7
    Trophy Points:
    44
    Gender:
    Male
    Well said I'm going to leave it alone until it gives me a problem.
     
    Awk08 likes this.

Share This Page