New here. Need help jetting my 02 Blaster. It is bored .40 over w stock jug and carb.It has FMF turbine core exhaust and I run it w the lid on. I live in lower Michigan I think 600 ft. above sea level and running in 80 90 degree weather. Please and thank you!
Lil help w jetting
- Thread starter matt08141972
- Start date
definately !
buy 300/290/280/270
start large and plug chop down to perfection.....
http://www.blasterforum.com/threads/how-to-plug-chop.53237/
do float check and airscrew adjustment first:
http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/
http://www.blasterforum.com/threads/adjusting-your-airscrew-pilot-jet.51060/
Is it a full FMF system, or just the turbine core silencer?
If only the silencer, you may not need to increase the size of the main jet as big as a #270.
Is it the stock air filter?
If only the silencer, you may not need to increase the size of the main jet as big as a #270.
Is it the stock air filter?
Yes full FMF and stock filter. All stock beyond that. Thank you for your replies! Have more confidence tackling minor issues with my favorite toy in the shed!
Ok , what does a single jet cost? Can you buy a kit cheaper? Anyone else think I should remove lid?Hi matt! I agree with awk, thats about what I told ya too. Btw pull that damn lid off !!!
Just go to pr or honda east, they are like 3 bucks each I think, dont buy a kit... yes! Remove lid! Mo powas !
Don't mean to harp but I feel the need to clarify.
It's bored to 0.040" over , 40 thousandths of an inch. Just over 1mm.
