Just picked up ‘03 blaster need help

Jay403

New Member
May 9, 2018
4
0
18
27
hey guys I just picked up my first blaster... just had some questions regarding if I should mix the gas or rely on oil injection and just other general stuff like how I’d be able to tell what it needs or just general maintenance stuff!
 

Attachments

  • D47C684E-C631-49EE-9B97-F027F50F4EE4.jpeg
    D47C684E-C631-49EE-9B97-F027F50F4EE4.jpeg
    1.3 MB · Views: 151
Looks pretty good . Definitly check over the quad before you start riding it . Download the service manual for general info and specs on the quad . Ask questions on here if you need help .

I would start with:

Check the front end...tie rods...ball joints...a-arm bushings . Steering shaft bushings
Front wheel bearings and brakes
Swing arm bearings
Rear axle bearings and brakes .
Change the trans. oil
Check the condition of the reeds
Look at the sprockets and check the chain for proper tension and wear
New spark plug
Clean or get a new air filter
Check compresion to see how it is . Leak test the motor .
Torque the wheels to spec
Make sure clamps on the carb. are tight

I can go on and on lol
 
Looks pretty good . Definitly check over the quad before you start riding it . Download the service manual for general info and specs on the quad . Ask questions on here if you need help .

I would start with:

Check the front end...tie rods...ball joints...a-arm bushings . Steering shaft bushings
Front wheel bearings and brakes
Swing arm bearings
Rear axle bearings and brakes .
Change the trans. oil
Check the condition of the reeds
Look at the sprockets and check the chain for proper tension and wear
New spark plug
Clean or get a new air filter
Check compresion to see how it is . Leak test the motor .
Torque the wheels to spec
Make sure clamps on the carb. are tight

I can go on and on lol
Ththal
Looks pretty good . Definitly check over the quad before you start riding it . Download the service manual for general info and specs on the quad . Ask questions on here if you need help .

I would start with:

Check the front end...tie rods...ball joints...a-arm bushings . Steering shaft bushings
Front wheel bearings and brakes
Swing arm bearings
Rear axle bearings and brakes .
Change the trans. oil
Check the condition of the reeds
Look at the sprockets and check the chain for proper tension and wear
New spark plug
Clean or get a new air filter
Check compresion to see how it is . Leak test the motor .
Torque the wheels to spec
Make sure clamps on the carb. are tight

I can go on and on lol
alright well I took it camping last weekend and somehow lost the muffler and blew out the back brakes clearly sh*t wasn’t on tight enough. All the cables are still hooked up for the brakes any clue what it could be? I work too much to really take sh*t apart so I gotta haven’t really poked around with it yet
 
Looks pretty good . Definitly check over the quad before you start riding it . Download the service manual for general info and specs on the quad . Ask questions on here if you need help .

I would start with:

Check the front end...tie rods...ball joints...a-arm bushings . Steering shaft bushings
Front wheel bearings and brakes
Swing arm bearings
Rear axle bearings and brakes .
Change the trans. oil
Check the condition of the reeds
Look at the sprockets and check the chain for proper tension and wear
New spark plug
Clean or get a new air filter
Check compresion to see how it is . Leak test the motor .
Torque the wheels to spec
Make sure clamps on the carb. are tight

I can go on and on lol
Don’t mean to be a bug but if you could message me privately I have a few questions I just don’t know how to message you thanks in advance bro