Jetting tors needle postion float position carb setting

Blastermit

Member
Mar 13, 2019
42
0
32
25
What jet should i run in the stock carb for summer and winter and what should the needle be set at for stick setting as long with the floats and i have a 1989 blaster the tors is stripped and no longer works in order to bypass to i just unplug the tors wires from under the hood and carb i have a twist throttle so the one is already disconnected
 
The stock servings are 230 main, 32.5 pilot and needle in middle clip.

Idle should be set to specificarions.
If you are pre mixing you may need to use a 240 main, but plug chop to confirm.

Float level is 20-21.5 mm