It smokes a lot and runs hot.

Discussion in 'Engine' started by brian3127, Aug 7, 2019.

  1. brian3127

    brian3127 New Member

    Joined:
    Jun 22, 2019
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    22
    Gender:
    Male
    just a question my blaster is smoking alot. it had a full rebuild seals, bearings, trans, piston and rings.
    oil injection delete, tors is still on, ran in a covered air box with new filter, and the carb has been cleaned. original pipe and exhaust. fuel mix 32:1. is it possibly jets in the carb as to why it smokes a lot and it seems to run hot. the blaster runs strong and starts on first or second kick.
     
  2. brian3127

    brian3127 New Member

    Joined:
    Jun 22, 2019
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    22
    Gender:
    Male
    i am going to buy a infrared laser thermometer today to check how hot the engine is getting. what is the optimal running temp of a blaster
     
  3. Awk08

    Awk08 Administrator Staff Member Technician

    Joined:
    Jan 30, 2009
    Messages:
    24,170
    Likes Received:
    2,144
    Trophy Points:
    175
    Occupation:
    Electrician/Contractor
    Location:
    Pa.
    Was it .....
    Leakdown tested ?
    3 heat cycles and retorque head and base nuts ?
    Jets removed and cleaned with carb cleaner and compressed air ?
     
  4. brian3127

    brian3127 New Member

    Joined:
    Jun 22, 2019
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    22
    Gender:
    Male
    It was not leakdown tested but everything else was done. Could you possible post a link to how to make a leakdown tester please.



    thanks.
     

Share This Page