Issue idle

[mattd68]

Hello,

Sry for my bad english, I come from Belgium

I just buy a Yamaha Blaster 200 (2002 year) and the vendor say: it's just idle, you have to put a new one because I lost it. He tell me I have to put idle screw on the little hole on the picture, I don't know anything in Quad so I buy but its not the good one.

Now I know than the idle adjust is on the Up of the carbu, as you can see on the picture.

So I can start the Blaster and go to the road with, but when I release gaz the blaster stop to work.. I will upload a video to explain its more easily. You think its on the carburator or something else?

Thank you in advance.

 

[Larry's Shee]

https://www.bikebandit.com/oem-parts/2000-yamaha-blaster-200-yfs200m/o/m145954#sch104689

Are you referring to #20 in the diagram? I can't tell from your picture. Usually referred to as idle air screw. 1 1/2 turns out from lighly aeated. There is also a large screw on the very top for idle. Air screw is for mixture, large screw for speed if mixture is correct.

 

[mattd68]

Sorry I cant load the website but thanks for your help !

I find somebody and buy a new carburator, now everything is OK on idle

See you