Is this carb different than stock?

Oct 30, 2017
307
58
75
So I was on Dennis Kirk and they have a Mikuni carb on there (26mm VM) and something about the jetting doesn't seem right. I'll post the link in here when im done. Why are the jets a different size and can I just swap those jets out for the current jet setup I'm running now from my OEM blasty carb into that new one? Let me know guys. Was gonna get a 28mm Cathy but I don't feel like Jerry rigging and modifying the intake and airbox side for it to work. Heard people had clearance issues. Here's the link to the carb in looking at https://www.denniskirk.com/165141.s...xV5mNIthwjc0lQwBoC8XkQAvD_BwE&ad=154639440447

Also, I seen a flat side carb as well (will post the link) what do I need in order to run it and how does the jetting work in those or are they the same as the normal blasty carbs http://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=TM-FLATSLIDE-CARBS&CartID=
 
You have to use ALL of the Jets from old carb. Main, pilot, needle, wouldn't hurt to compare the emulsion tube//main jet holder.

Good price for the carb. Impossible to sell jetted for all situation.
 
You have to use ALL of the Jets from old carb. Main, pilot, needle, wouldn't hurt to compare the emulsion tube//main jet holder.

Good price for the carb. Impossible to sell jetted for all situation.
I know that's why I'm buying it. Couldn't beat the price. All I need is a cable lol. What about the flat slide carb i posted the link to? Any answers to that question?