INFO ABOUT PICS THAT EVERYONE SHOULD KNOW/GIF/JPEG.
- Thread starter speedyslyder
- Start date
The lines are in need of justification and the indents tidying up, but a good effort.
I will be very happy to post up the new screed anytime someone asks how to perform a leak test!
I will be very happy to post up the new screed anytime someone asks how to perform a leak test!
microsoft word to jpeg/pic. if you type in word use this to convert it to a pic
unless you can figure out a better way in little time
for your information needs
http://www.convert-doc.com/convert/wps-to-jpg.html
unless you can figure out a better way in little time
for your information needs
http://www.convert-doc.com/convert/wps-to-jpg.html
there is also the jpeg to pdf converter's
search those bad boys.
there is multiple ways to alter files/whatever works easiest for you will work.
search and destroy.
key words...convert/animations/free online./lets not forget the old reliable png=portable network graphic...and of course JASC animation shop 3 which is responsible for all the crap i am posting on here/and i do mean all it is free and simple as a childs book.
search those bad boys.
there is multiple ways to alter files/whatever works easiest for you will work.
search and destroy.
key words...convert/animations/free online./lets not forget the old reliable png=portable network graphic...and of course JASC animation shop 3 which is responsible for all the crap i am posting on here/and i do mean all
it is free and simple as a childs book.
Last edited:
this is 100% your typing.
Good call i just thought it was a lil blurry in this pic.
i already had this but did not post cuz it is a tad blurry.Idont remember if i sent it to you in the pm
but this is exactly what you typed above.Or you could just copy and paste that text all day.Perhaps for the person wanting to read it offline/or print it (the image is best way).
i have more stashed on my pc that no one has seen lol
I like the white background, but would like the format to be as this copy.
Trouble is that every time you edit an re post the layout changes.
Leak tester instructions.
Using this test with a spray bottle and a soapy water solution will aid in finding a leak
when you spray the suspected area with the soap water solution.
If there is a leak, bubbles will form, however you may have more than
one leak so the test must be repeated to find other leaks.
Before performing the test it is important that the spark plug is in tight,
the head and cylinder bolts are torqued to specs.
Using this test with a spray bottle and a soapy water solution will aid in finding a leak
when you spray the suspected area with the soap water solution.
If there is a leak, bubbles will form, however you may have more than
one leak so the test must be repeated to find other leaks.
Before performing the test it is important that the spark plug is in tight,
the head and cylinder bolts are torqued to specs.
1. Remove the carb, insert the tool adapter into the intake boot and tighten clamp.
2. Remove the exhaust header pipe and flange and block the exhaust port, either by using an
expandable plug or by placing a piece of inner tube between the flange and cylinder and
tightening down to specs.
3. Pressurize the inlet to 7psi,(no more) by using a cycle pump or surgical bulb.
4. Observe the pressure for 30 seconds, if the pressure is stable at 7psi, continue to observe
for 5 minutes.
If 7psi holds for 5 minutes there are no leaks!
5. If pressure is lost, firstly check the tester for leaks by spraying it all over with soapy water.
Bubbles will form at the point of the leak.
6. Maintain pressure at 7psi and spray all around reed cage, carby boot and where the adapter
is inserted. Bubbles will be
seen if there is a leak.
7. Spray around the exhaust plug or flange block off and observe for bubbles.
Maintain a pressure of 7psi.
8. Spray around the base of the cylinder where it meets the case, and around the nuts.
9. Spray around where the head meets the cylinder (you may need to spray a little extra
to make sure the gasket is wetted).
Spray around the spark plug and head bolts.
10. Immerse the gearbox breather tube in fluid and observe for bubbles.
(If bubbles appear you will have to remove the gear case and spray the crankshaft seal
and crankshaft collar.
You will need to remove the soapy water by spraying with
brake cleaner before re assembly.)
To continue testing clamp breather tube.
11. Remove flywheel with an approved puller, then remove the stator assembly
and spray soapy water around the crank seal.
12. Spray soapy water all around the crankcase join and observe for bubbles.
If the pressure still drops
and you have to continually top up the pressure, again clamp the gearbox breather to
confirm an internal case leak.
There may be some internal damage that will need addressing.
13. After all leaks have been found and repaired, leak test again.
It is very important that a leak test be performed at least twice a riding season
to insure that a lean mixture does not harm the engine.
Leak tests should be performed after every engine rebuild
and intake related hardware replacement.
to insure that a lean mixture does not harm the engine.
Leak tests should be performed after every engine rebuild
and intake related hardware replacement.
Last edited:
this is as close as i can get it
i have not tried word but the one on my pc dont allow me to save it as a pic.So if i type it in there i need to transfer it somewhere and will either become blurry/or it will change the indentations?
this one is too long imo
your right it keeps changing cuz thats the way it wants to be
gosh we might have to settle for the origional blurred 1 lol
i have not tried word but the one on my pc dont allow me to save it as a pic.So if i type it in there i need to transfer it somewhere and will either become blurry/or it will change the indentations?
this one is too long imo
your right it keeps changing cuz thats the way it wants to be
gosh we might have to settle for the origional blurred 1 lol
Last edited:
Well I don't know ho good your phone is, but you might be able to take a pic of it??? then its a pic file. You would have to change page zoom to fit it all so idk how it would turn out
geeezzz know you tell me lol where yah been tbrooks not sure about blur factor though
im not on a phone
Last edited:
Getting there, just gotta get the word wrap correct and we are in business.
Have you noticed that every time this gets posted the format changes.
Have you noticed that every time this gets posted the format changes.
the screen shots did not change.there is 3 of them above lol
yeep i sure have.......those screen shots might work lol i have not type a document but to tell yah the truth i dont believe it will work any better on the form then any of these
and im still waiting on herps lol
what about me?
i sent my edited version to blaaster. you also got a clear picture and a downloadable pdf so im not sure what i have to do?
i sent my edited version to blaaster. you also got a clear picture and a downloadable pdf so im not sure what i have to do?
I might just print it out, take a HD pic and use it, I must be better than Slickerthanyou's blurry original.
got to go with what we have.
it is better then slicks.
dont think rookies at leak testing will have any problems with it.
im not making anymore they are just fine in my opinion/except the 1 above that is missing the number 6
which i did not realize i cropped it out till the next day lol.
could thumbnail it and let them click if not wanting to take up so much space.
pdf/copy paste text/or jpeg image file/or the 3 png=transparent ones above...thats a lot of options right thurr.
Last edited:
