HELP!!!!!!!!!! (pics)

[88blasterman]

Ok so some of you may know what i have been talking about my tires rubbing my nerfs. here is what i mean.

[/IMG]

[/IMG]

[/IMG][/IMG]

[/IMG]

[/IMG]

 

[mud runner]

cut it off1515115151515

 

[88blasterman]

what should i do!?

 

[Blaaster]

Fix up the pics so we can see them all.

 

[blasterboy32]

cut it off or atleast grind some down

 

[ddq]

^^^^^^^^ This. Cut it off.

 

[88blasterman]

then how do i put my plastic heel guards back in?

 

[toytech]

cut it off1515115151515

I like your avitar

 

[ddq]

then how do i put my plastic heel guards back in?

Modify the mounts for the heelguards.

 

[88blasterman]

Thats alot harder then it seems

 

[brandoz28]

how big is the rear tire?????? 22"? I would go down in tire size personally....or put a longer swinger on

 

[88blasterman]

20" and a extended swinger is alot more then a banshee axle or spacers

 

[Blaaster]

Small spacer blocks should fix that problem, or a wider axle.

 

[88blasterman]

has anyone ever used extened studs? they are like $50

 

[brandoz28]

i have some on the front of mine, but i wouldn't jump them

 

[88blasterman]

what about on the rear, im going to the track this wednsday

 

[ddq]

Think about your options. If you just cut or grind a little bit off the nerf you will have a sharp edge that will slice a tire if it touches it. If you cut a whole section off then problem solved. If it were me, I would cut a few inches off the nerf and modify the heel guards to work or go without them.

 

[88blasterman]

i thought the same but i dont want the tires to eat my feet

 

[Blaaster]

Studs jump OK, my lad has 2" on the rear and no problems yet, and he runs MX.

 

[brandoz28]

I would trim that mount to clear the tire. i would not run stud spacers if you're going to MX it