hard to get in neutral

[atvmxr]

Ive adjusted the clutch lever for less free play, changed oil, new clutch disks, basket not grooved. Its about impossible to get the thing in neutral when its running. What am I missing

 

[Awk08]

The shift star and shift pawl on the end of the shift shaft (all one unit) are the only other possible problems

 

[Slydog]

X2 on prawl.Some other ideas.Does it feel like the clutch is not disengaging all the way? Got the right oil in it for a wet clutch? Push rod for the Pressure plate adjusted correctly so actuator arm lines up with case mark..
Soak your disks priar to installation

Try putting it in nuetral before you come to a complete stop

 

[atvmxr]

i heard someone on FB talking about a shift star mod, I guess that is what i need?

 

[atvmxr]

Try putting it in nuetral before you come to a complete stop

thats pretty much all I can do. if its rolling, then can get in nuetral. once i stop, not happening

 

[Slydog]

Are you running wet clutch oil?
Is actuator arm adjustment correct?

 

[Larry's Shee]

The adjustment of pressure plate is critical for proper use. All else fails try holding it with one hand and shifting it with other.

Does it feel like it's trying to move with the clutch pulled? When in neutral and you put it gear does it clunk w hard or jump?