Flooded

[BigEZ]

Hi folks. 06 Blaster, Carb is good stock motor, stock 230 jet. Needle adjusted on 2nd notch, air screw 1 and a half turns open. New coil, plenty of spark. Floods every time. I can rip it around and then shut it off pull the plug out and its wet. Any suggestions?

 

[Awk08]

I've tuned plenty of blasters with the stock carb, from bone stock to ported w/ pipe. none of them needed the needle clip anywhere but in the middle.

check your float and float needle........

https://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/

https://www.blasterforum.com/threads/easy-and-almost-free-way-to-stop-leaky-carbs.33335/

reeds good ? no cracks, chips or petals hanging open ?

 

[BigEZ]

Had the carb apart today. Everything is good. I will check the reeds. If new are needed what do you recommend? Thanks Awk08. Nice Freedom Skull

 

[BigEZ]

I've tuned plenty of blasters with the stock carb, from bone stock to ported w/ pipe. none of them needed the needle clip anywhere but in the middle.

check your float and float needle........

https://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/

https://www.blasterforum.com/threads/easy-and-almost-free-way-to-stop-leaky-carbs.33335/

reeds good ? no cracks, chips or petals hanging open ?

Petal was hanging open on the one side. Thanks again.