Exhaust stud problem

mlrblaster

Member
Dec 16, 2011
94
20
59
53
Smyrna Tn
I have an exhaust stud that will not stay put. I think that it may have pulled out part of the threads. This is the first time I've had this issue, what's the best way to fix this properly.
 
Drill and tap the next size stud. Drill exhaust flange to acomadate New stud. I think the stock studs are 8mm. So next size would be 3/8 or 10 mm
 
I had the same problem and did what 82 cut said and its been working fine for me. Weather you end up using a regular hex bolt or a stud just make sure you don't over torque what ever you replace it with otherwise you'll run into the same problem in the future.