do i need this?

Blaster 01

New Member
Nov 12, 2010
103
1
0
32
Fort Mill SC
ok so i went out to fix a broken stud that hold the cylinder on. anyway i found that i had this (picture below) and a gasket under it and there was also a gasket on the cylinder part too.
CIMG0141.jpg


but my gasket kit only came with one like this
CIMG0142.jpg


so my question is do i need the one in the first pic. it came on the bike when i bought it

Thanks
 
yes, put it back in. the cylinder has been ported for it or has a stroker crank.


and get better gaskets.....you will blow that green one out and burn it up
 
Is this something that should be on a 240? I recently put my bike back together (it was in parts when I bought it) and I didnt have anything like that, just the gasket. When it was all back together I did spin the motor only with plug in and didnt seem to hit the head....
 
the spacer only needs to be there if the cylinder has been ported to use it, or it it has a stroker crank in it