CR 250 Pipe

[jvb]

CR 250 Pipe on Vito's 240(i'm mocking it up now on stock cylinder and Vito's head), building/fitting it now prior to full rebuild this winter
If anyone else want to give this a try, i used a 1989? pipe(don't know for sure because it was in pile of stuff i bought for my 1986 CR 250) it fit's in there barely but it does clear the frame.Can't weld for sh*t as you can see, but that doesn't stop me

 

[jvb]

Nerf bars are crooked i know,

tailpipe is next on the list and some exhaust-springs for my slip-on connection.
Looks sweeet

 

[speedyslyder]

cant wait to hear the final product
video of it revving a must

 

[jvb]

cant wait to hear the final product
video of it revving a must

Thanks Speedy,will sure do.
When the Blaster is rebuild this winter, i'm getting it on the dyno, i'll post a video.

 

[jvb]

Going for the cr 125 reed cage,intake manifold and Keihin 34mm

 

[79 bronco]

speedemon17 had cr125 vforce 3 reeds in his blaster. They welded a reed spacer to the intake to give it more room.

 

[jvb]

Like I already said, i'm welding on the flange of the cr 125 cylinder, wich acts as an spacer.
This set-up will flow with out 'steps' in the air stream.

 

[jvb]

speedemon17 had cr125 vforce 3 reeds in his blaster. They welded a reed spacer to the intake to give it more room.
View attachment 24865 View attachment 24866

By the way a polished inlet tract isn't helping!
Should be beed blasted for the best result, if you polish it it will create unwanted turbulence...

 

[Larry's Shee]

So, any updates on this ??

 

[jvb]

The blaster has an L

C powervalved Kawasaki kx engine fitted now, the blaster 240 engine with the cr 250 pipe is being fitted on a 80's dirtbike.
So with some patience you'll find out if it's going to perform or not...

 

[byrd]

soo....how did tht pipe do. was thinking about tht myself but didnt wanna f*ck a good pipe up jus to try sumthg. so let me knw

 

[specialized7]

Looks good. I'm digging the gold rims