Blaster top end need help

[Stephenk]

New to this site guys Had my blaster out today and made a pop then no power atall....

 

[Slydog]

New to this site guys Had my blaster out today and made a pop then no power atall....

Alittle more information would help the guys answer your question better.
Any history. On the bike?or recent mods
New carb?
Do you still have compression?
Does it still run?

 

[Stephenk]

Alittle more information would help the guys answer your question better.
Any history. On the bike?or recent mods
New carb?
Do you still have compression?
Does it still run?

Alittle more information would help the guys answer your question better.
Any history. On the bike?or recent mods
New carb?
Do you still have compression?
Does it still run?

Not long bought it. Got very little compression after it died on me tried a few kicks but nothing.

 

[Slydog]

If its got very little compression? Then it sounds like it's time for a topend rebuild. If possible do a 2t leakdown test. To check for air leaks.and clean bike before disassembly.
Need to find out why you lost compression. Wrong jetting? Airleaks?
Wrong oil or mixture? Or no oil in fuel.
This way you don't have the same problem
After redoing the top end

 

[Stephenk]

If its got very little compression? Then it sounds like it's time for a topend rebuild. If possible do a 2t leakdown test. To check for air leaks.and clean bike before disassembly.
Need to find out why you lost compression. Wrong jetting? Airleaks?
Wrong oil or mixture? Or no oil in fuel.
This way you don't have the same problem
After redoing the top end

Have you got a link for all the parts I need ? Cheers

 

[Slydog]

If you have a local machine shop near you they can measure your cylinder to see what it needs to be bored out to. and order all parts

 

[Larry's Shee]

Don't be cheap !! A chinese top end will probably end up costing you more in the long run.
Compression and leak down test is needed to determine the cause.