My blaster won’t start. It will do a couple of minutes but then will choke up and die and not start. It can’t rev out either.
Blaster Not Starting
- Thread starter Connor Hutton
- Start date
Everything has been cleaned new spark. The compression is good enough for it to start. It just won’t stay running. Adjusted the floats, new spark plug. You need to rev it out high to keep it running otherwise it will die.
I’m having the Same problem with my 03 blaster, can’t get it to crank after rebuild , it’s firing and getting gas
ALL of what Awk said !! You have to take carb completely apart, you have to be able to see through the Jets. Pull main jet holder/emulsion tube and clean. It comes up through slide bore after removing main jet, washer, and slosh baffle.
Clean float needle and seat. https://www.blasterforum.com/threads/easy-and-almost-free-way-to-stop-leaky-carbs.33335/ Set float height.
These are simple machines, but things have to be right.
Clean float needle and seat. https://www.blasterforum.com/threads/easy-and-almost-free-way-to-stop-leaky-carbs.33335/ Set float height.
These are simple machines, but things have to be right.
Carb has been cleaned, even have a new carb... the plug is firing and it’s getting gas, don’t know if the spare is weak or not
