BLASTER DEAD

Jay403

New Member
May 9, 2018
4
0
18
28
Alright guys before you tell me to go read all the usual threads, I have an 03 blaster that I bought a few months ago. Never had any issues until I was Riding with the boys a couple weeks ago. Opened er up full throttle and then it just died outta nowhere. I did my research and did a tors delete and it still won’t start. It has compression and spark so at this point I really don’t have a clue what’s going on. I’d rather ask around on the forum than spend hundreds on a mechanic considering I only paid $800 for the thing. I hope somebody can give me an idea of what’s going on and why It refuses to start!!
 
Give that carb a good clean. Check your reed valves. change the plug, leak test and try again, if no go, you going to have to look into other things, the stator, TORS, magneto key, hole in piston? etc...
 
Fuel, air, spark at the right time. What are you missing?

How many PSI on comp test? As mentioned check reeds, leak down test before, and after inspecting the reeds. Inspect flywheel key. Find the manual in general repair.

Never hurts to search and read to learn about your machine.