Bike won’t start

Aug 21, 2018
25
0
33
31
So I have a 2001 blaster with no aftermarket part other then power reeds I’ve donee oil pump delete and tors delete bike takes forever to start then it’ll run for 5 mins then die and takes forever to get started again if it even starts. I know there’s stuff out there but if anyone can help me out with the answer it be much appreciated.thank you
 
Check yer carb spark and do a presgure check also a comprwshion check sounds like it starving for fual make shure yer carb is clean and qorking properly if firing is it a weak spark thats 6er starting points also double check make shure you deleted tors properly
 
How mechanical are you?
What doe your spark look like?
Is it Fat Blue ?
Or Lazy Yellow ?
How about the plug itself? Might be time for a new one.
 
How mechanical are you?
What doe your spark look like?
Is it Fat Blue ?
Or Lazy Yellow ?
How about the plug itself? Might be time for a new one.
Well I’m not sure what you mean by fat blue or lazy yellow lol but spark plug coil and wire are brand new I cleaned the carb and put a brand new petcock it has brand new power reeds and the delete is correct I double checked I still need to do a compression check
 
you have the three wire TORS unit unplugged ?
double check them reeds
float height correct and float not hanging up ?
airscrew at 1.5 turns out to start ? then fine tune for highest idle
 
you have the three wire TORS unit unplugged ?
double check them reeds
float height correct and float not hanging up ?
airscrew at 1.5 turns out to start ? then fine tune for highest idle
The float I’m not sure I’ll double check that for Sure and thank you for explaining the spark
 
Last edited: