Air leaks

[Spencer Evans]

Hi everybody, I just got done rebuilding the top and bottom ends on my blaster. I finally got it started today after having to use starter fluid, but it immediately revved out. I set the carb back to the settings from the manual and it still happens so I’m guessing I have an air leak. I installed new seals and gaskets everywhere, maybe something isn’t torqued down correctly? Thanks

 

[Tankbuster]

First dont use starter fluid to start it (not good)... dont run it with an air leak or you will not like the results. Do a leak down test. Get a hold of AWK08 for a tester. I believe he sells them. Besides He's the expert about Blasters!

 

[Spencer Evans]

Thanks I’ll ask him