Does any one know the size of the a arm bolts on the blaster ? Or should i get new ones oem at yamaha?
Aarm bolts ?
- Thread starter blasterbrian
- Start date
Don't know where exactly you would get flange head (hardened ?) plus flange nuts. Fastenal or Grainger ?
Even though OEM is pricey, you know they're correct.
Saw some on Amazon, uppers are half as much.
Might see if Ken O'CONNOR carries them.
Might not be flange head, to cold to go out and look
Even though OEM is pricey, you know they're correct.
Saw some on Amazon, uppers are half as much.
Might see if Ken O'CONNOR carries them.
Might not be flange head, to cold to go out and look
If you only want to make them look new try this:
https://www.lowes.com/pd/SEYMOUR-St...MIr5PSnZ2S2QIVAyaGCh3AtQXCEAQYBCABEgJdaPD_BwE
I used it on a quasi-restoration over ten+ yrs ago, most bolts still look pretty decent. I also used it on the crankshaft where the seal runs, minor pitting. Impossibile to get a crank for 30+ year old MX bike.
Hopefully others will see this and use it !!
https://www.lowes.com/pd/SEYMOUR-St...MIr5PSnZ2S2QIVAyaGCh3AtQXCEAQYBCABEgJdaPD_BwE
I used it on a quasi-restoration over ten+ yrs ago, most bolts still look pretty decent. I also used it on the crankshaft where the seal runs, minor pitting. Impossibile to get a crank for 30+ year old MX bike.
Hopefully others will see this and use it !!
Similar threads
