Blasterjohny Member Feb 6, 2020 52 13 44 East, Texas Feb 6, 2020 #1 After riding I had a little oil mix coming out the exhaust port is it because I'm to lean or should I even be concerned about it? Attachments IMG_20200206_104718.jpg 1.1 MB · Views: 151
After riding I had a little oil mix coming out the exhaust port is it because I'm to lean or should I even be concerned about it?
Awk08 Administrator Staff member Technician Jan 30, 2009 24,427 2,291 175 Feb 6, 2020 #2 it's normal, but if you're questioning your jetting ..... plug chop. Get a new exhaust crush washer apply a thin coat of Permatex high temp copper to the backside of the flange, bolt it up and allow the rtv to cure 24 hours before running it. Reactions: Blasterjohny
it's normal, but if you're questioning your jetting ..... plug chop. Get a new exhaust crush washer apply a thin coat of Permatex high temp copper to the backside of the flange, bolt it up and allow the rtv to cure 24 hours before running it.
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI Feb 6, 2020 #3 Clean the port area and pipe before using RTV Reactions: Blasterjohny