Search results

That's more then half of what I paid for the blaster I was looking for a used one for cheap

I need a good usable crankshaft lmk what you have...

Ill sell you some works dual rates, they have black springs, I bought them for my blaster but then I traded the blaster for a shee and kept the shocks there in good shape, I run them on my shee but they make it sit like an inch lower since there for a blaster. so I want to sell these and buy...

didn't read the whole thread, but if your not running straight cut gears with the roller bearings, you will destroy them eventually... TZ Bearing - Banshee HQ Forums

40:1 with klotz ST here

sweet! how much did you pick those up for?

hmm my shee has bottom end like a tractor, and i dont find it hard at all to go through some really tight trails with it... i perfer it over my old blaster with a la sleeve bbk

thanks guys! !

thanks man! !

smoke ring position is for the throttle position i always thought... tip being idle (if you let it idle there will a color there) 1/4 of it being half throttle, and half of the electrode being wide open, so after time you hit all of these ranges and thats why the plug is colored all the way down

did you put a piece of flat to fill in that gap or did you just bridge it?

holy sh*t a 15 year old with a aerodynamics degree!

No the front fenders are there to provide lift so when ever you put in the dual powerband it flys off... and if you reverse the front fenders then they scoop the air and forces the bike down so you dont flip over... I cut the front fenders off my banshee because i put in a dual powerband but...

really? do you ever listen to yourself?

probably from the same guy i called for a motor for $50 in harrisburg too, bastard sold it great deal though

for the break in i would do two 15 minute idleing periods with a fan blowing on the engine, but then i wouldnt do the ride 1/4 throttle 1/2, 3/4, then full, but instead just push it harder than you ever would, the increased pressure on the piston from riding it hard seals the rings better and...

haha i can see my self just riding on the roller the whole way down the road

i believe you tell them to bore it out .002-.004 milimeters bigger than what the piston is

welcome! !

the old fast treekers